Tech-source GFX 400 Series Manual do Utilizador descarregar pdf (Página 50)

GFX 400 Series Installation & Reference Manual

B-4

B.4 GFX 400 Series Cabling

B.4.1 GFX 450

GFX 450 has one DVI-I and one HD-15 connector. The DVI-I

connector supports both analog and DVI output. Therefore,

connect the appropriate cable depending on your monitor type.

The HD-15 supports analog video only.

B.4.2 GFX 420 and GFX 440

Both of these cards have LFH60 connectors for video output and

require special splitter cables. Detailed descriptions for

connecting various monitors are provided in the sub sections

below.

Attach the GFX 400 Series dual-monitor adapters (splitter

cables) to the connectors on the bracket of your GFX 400 Series

card. Make sure the connectors are firmly in place. The other

end of each adapter has DVI connectors to plug into each of the

two displays. Please refer to illustrations in Figures B.1 and B.2.

B.4.2.1 Digital Monitors

The supplied dual-monitor adapter supports digital LCD flat

panel displays with a DVI interface. These displays must have a

DVI-D or DVI-I input connector. Refer to Figure B.1 for an

illustration. Connect the LCD’s video cable to one of the two

connectors of the dual monitor adapter.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Sem comentários

Tech-source GFX 400 Series Manual do Utilizador Página 50